1.75 OD Pole Pin- Plastic 3/8"

1.75 OD Pole Pin- Plastic 3/8"Constructed of rugged black ABS plastic, this injection molded replacement plug serves as the top end pin for our 1. 75"OD side poles and center poles that have a 0. 049" wall thickness. The stainless steel pin rod measures 0. 375" in diameter and extends 4" from the end of the plastic insert. The top pin is a friction fit and is installed by hand then hammering into final position with a rubber mallet or by simply tapping on the ground.

Where traditional strap and buckles tend to deflect the tent top downward near the eave

This 1" wide ratchet tensioner is used for valance tensioning of the Festival CAN-W frame tent system

The top section of the pole is fitted with an ABS plastic injection molded top pin

baseplates

with 1" spacing between heads

Jumbotrac Lite and Qwiktop frame tent systems

the adapter makes it possible to remove stakes that are fully embedded

It is used predominantly on all 10' wide and 15' wide models which utilize a 2

Other straps used in short term applications should be tested periodically to assure that they meet the intended working load for their design

780lb breaking strength

It is designed to slide over the outside of the 2

The 8mm Keder Leader Set is utilized to reduce the wear and tear on the leading keder edge of kedered roof panels that use 8mm keder